Shipping and delivery available
Select options at checkout
If you're building a new home, you can simplify the installation of the Klipsch® CDT-2800-C II, CDT-3800-C, R-1800-C or CDT3800CII , R-2800-CSM in-ceiling speakers with these pre-construction brackets. Install them before the drywall goes up to mark the speaker locations for your builder, and you won't need to cut holes later. The metal wings attach to studs and joists via screws, staples, or nails.
CS Series' high-quality driver components make an audible difference
Superior PTD™ Pure-Titanium Tweeter Domes.Ferro-fluid damped and cooled to ensure smooth high-frequency performance with amazing clarity across a wide listening area.
Superior Mineral-Filled Polypropylene Bass/Midrange Cones. Oversized computer-optimized ferrite magnets and high-power motor structures deliver detailed midrange performance with clean, extended bass. Even movie dialog is incredibly clean and clear.
What's New in CS Series v.3?
- Bezel free aesthetic delivers invisibility! Great sound, but out of sight which is exactly the point of custom!
- ABS clamps replace the original polymer mounting brackets, cutting down on installation time and simplifying installation.
- Pocketed screw holes in the flange help hold the drill steady. making the installer's job so much easier and faster.
- A slight slope in the baffle's flange prevents unsightly gaps around the install for an even better aesthetic!
- High-strength magnets hold grilles securely in place in the wall or ceiling.
- No masking required—this makes the grilles faster and easier to paint, if painting is desired.
- Redesigned, Easy-access Binding Posts feature a larger wire access hole and connect via banana plug, pin or bare wire.
Same great sound. Faster, easier installation!
Our New High-Strength ABS Chassis and Clamp Systemaddresses the flexibility problem that plagues all walls and ceilings. ABS stiffness combats unwanted resonances and vibrations and equally important, the new clamp design makes the installer's job easier and faster! Simply push the speaker into the ceiling or wall and screw it in ... YES! It really is that simple (see illustrations below).
A behind-the-ceiling look at how our new ABS clamps work!
Without any unnecessary pressure or force, each turn of the screwdriver turns the clamp. We show the starting point, we show the screwdriver working to turn the clamp, and finally, we show the speaker locked into place inside the wall or ceiling. It doesn't get simpler or easier!
Design |
2-driver, 2-way in-ceiling/in-wall, coaxially mounted high-frequency driver, ABS chassis/mounting clamps |
Crossover |
2nd-order electro-acoustic at 3.0 kHz |
Frequency Response On-Axis |
±2 dB from 70 Hz - 20 kHz |
Frequency Response 30° Off-Axis |
±2 dB from 70 Hz - 18 kHz |
High Frequency Driver |
19-mm (3/4 in) PTD™ dome |
Mid/Bass Frequency Driver |
165-mm (6-1/2 in) mineral-filled polypropylene cone |
Low Frequency Extension |
55 Hz (DIN) |
Sensitivity Room / Anechoic |
89 dB / 85 dB |
Impedance |
Compatible with 8 ohms |
Suitable Amplifier Power Range |
15 - 80 watts |
Maximum Input Power |
50 watts |
Finishes |
White, paintable |
Weight |
3.5 lbs. (1.6 kg) |
Overall Dimensions |
8.6875" (22.1cm) Diameter |
Cut-Out Dimensions |
7.75" (19.6cm) Diameter |
Minimum Mounting Depth |
3.375" (8.6cm) |
Minimum Internal Volume Required |
0.42 cu ft (12 L) |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.